How to check after floor heating is done
As winter approaches, floor heating is an important way of heating modern homes, and inspections after installation are particularly important. Recently, hot topics on the Internet about floor heating installation and acceptance mainly focus on inspection steps, common problems and solutions, etc. This article will give you a detailed introduction to the inspection methods after floor heating installation, and provide structured data to help you easily complete the acceptance.
1. Steps for floor heating inspection
After the floor heating installation is completed, you need to check one by one according to the following steps to ensure the normal operation of the system:
| Check items | Check content | Things to note |
|---|---|---|
| Pipe pressure testing | Check whether the pipes are leaking and whether the pressure is stable | The pressure should be kept above 0.6MPa, with no significant decrease within 24 hours |
| Manifold inspection | Confirm that the water distributor valve opens and closes flexibly and there is no water leakage | Valves should be clearly marked for easy operation |
| Thermostat test | Test whether the thermostat is working properly | The temperature setting should be consistent with the actual temperature |
| Ground flatness | Check whether there are any unevenness on the ground | The ground flatness error does not exceed 3mm |
2. Common problems and solutions
During the floor heating inspection process, you may encounter the following common problems:
| question | Reason | solution |
|---|---|---|
| Leaking pipes | Pipe connections are not tight or damaged | Reconnect or replace pipes |
| Uneven temperature | Improperly adjusted water distributor or clogged pipes | Readjust the manifold or clean the pipes |
| Thermostat failure | Circuit failure or thermostat damage | Check the circuit or replace the thermostat |
3. Precautions for floor heating inspection
1.Check time: After the floor heating installation is completed, the first inspection should be carried out within 24 hours to ensure that there are no leaks or other problems in the system.
2.Professional tools: It is recommended to use professional pressure testers and temperature detectors to ensure accurate data.
3.Record data: During the inspection process, various data, such as pressure value, temperature, etc., should be recorded to facilitate subsequent comparison.
4.avoid stepping on: Avoid stepping directly on the floor heating pipes during inspection to avoid damaging the pipes.
4. Floor heating maintenance tips
The long-term stable operation of the floor heating system is inseparable from regular maintenance:
1.Clean regularly: It is recommended to clean the pipes every 2-3 years to prevent clogging.
2.Check pressure: Before use in winter, check whether the system pressure is normal.
3.Thermostat Calibration: Calibrate the thermostat once a year to ensure accurate temperature control.
Through the above steps and precautions, you can comprehensively check the installation quality of the floor heating system and ensure worry-free heating in winter. If you encounter a problem that cannot be solved, it is recommended to contact a professional for repair in time.
check the details
check the details
en
