How to deflate new heaters: analysis and operation guide of hot topics on the Internet
Recently, with the arrival of the winter heating season, "How to deflate new heaters" has become one of the hot topics on the Internet. According to the search data of the past 10 days, the issue of heating usage ranks among the top five most popular topics in daily life, especially in newly renovated homes and in northern regions. This article will provide you with a detailed analysis of the deflation methods of new heaters based on the hot topics on the Internet.
1. Popularity data of heating-related topics across the entire network
| Topic keywords | Search volume (times/day) | Hot trends |
|---|---|---|
| New heater venting | 12,500 | ↑35% |
| Reasons why the heater is not hot | 9,800 | ↑22% |
| Intelligent heating debugging | 7,200 | ↑18% |
| Radiator cleaning | 5,600 | →No change |
| Floor heating exhaust method | 4,900 | ↑12% |
2. Operation steps for venting new heaters
1.Preparation: Close the main valve of the heating system and prepare a water container, screwdriver and towel.
2.positioning bleed valve: New heaters usually have automatic/manual air release valves in the upper right or upper left corner of the radiator, and some high-end models are equipped with electronic displays.
3.Deflation operation process:
| steps | Operation content | Things to note |
|---|---|---|
| first step | Turn the bleeder valve 1/4 turn counterclockwise | Using a dedicated key is safer |
| Step 2 | Hearing a "hissing" sound indicates the beginning of exhaust | Keep container water-tight |
| Step 3 | After the water flow stabilizes, close the valve | Observe changes in pressure gauge |
| Step 4 | Check whether the system pressure is normal | 1.5-2bar is better |
3. Discharge characteristics of different types of new heaters
| Heating type | Deflation method | Technical features |
|---|---|---|
| Intelligent thermostatic type | APP controlled automatic exhaust | Requires power connection |
| Plate radiator | Multi-circuit independent exhaust | Each circuit needs to be operated separately |
| convection heating | Side hidden exhaust valve | Decorative panels need to be removed |
| Composite material type | Dual system exhaust design | Separate treatment of water and gas lines |
4. Solutions to common problems
1.The air release valve does not discharge water: The valve may be clogged. It is recommended to use a needle to clear it after shutting down the system.
2.Repeated need to deflate: Indicates that the system may be leaking and requires professional maintenance.
3.Electronic display alarm: Record the error code and contact after-sales service. Do not force disassembly.
5. Expert advice
1. It is recommended that the air tightness of new heaters be checked every quarter.
2. Users using smart systems should regularly update firmware programs.
3. If the problem cannot be solved after 3 attempts by yourself, it is recommended to contact professional HVAC personnel.
Through the above structured data and operation guide, I believe you have mastered the correct method of deflating the new heater. According to network heat data, proper maintenance of the heating system can increase thermal efficiency by more than 30% and extend the service life of the equipment. It is recommended to save this article for future reference.
check the details
check the details
en
