How to dismantle telescopic drawers: Hot topics on the Internet and disassembly guide
In the past 10 days, the popularity of furniture disassembly and home renovation has continued to rise across the Internet. In particular, the disassembly method of telescopic drawers has become a hot search topic. This article will combine recent hot topics to provide you with detailed disassembly steps and precautions for telescopic drawers.
1. Analysis of recent hot topics (data in the past 10 days)
| Ranking | hot topics | search volume | Related content |
|---|---|---|---|
| 1 | Furniture DIY Makeover | 1,200,000+ | Includes drawer disassembly methods |
| 2 | Telescopic drawer stuck | 890,000+ | High demand for troubleshooting |
| 3 | Slide rail repair | 750,000+ | Related to drawer disassembly |
| 4 | Renovation of old furniture | 680,000+ | Disassembly is the first step |
| 5 | IKEA furniture disassembly and assembly | 550,000+ | brand specific needs |
2. Detailed steps for disassembling telescopic drawers
1.Preparation
Make sure the work area is well lit and prepare the following tools: Phillips screwdriver, flat head screwdriver, rubber hammer, gloves. It is recommended to wear protective glasses to prevent debris from entering the eyes.
2.empty drawer
Completely remove all items from the drawer and check to see if there are any set screws hidden beneath the items. Some designs have hidden anchor points at the bottom.
3.Release limit device
| Drawer type | Limit device position | Release method |
|---|---|---|
| Ordinary three-section rail | end of track | Press the plastic buckle |
| Hidden rail | inner groove | Turn the metal piece |
| buffer rail | Middle part of slide rail | Unbuffer first |
4.Main body disassembly steps
(1) Pull the drawer to the maximum position and observe the rail connection points on both sides
(2) In most cases, you need to press the release buttons on both sides at the same time to take it out.
(3) In case of jamming, tap the track joint to help loosen it.
5.Frequently Asked Questions
| Problem phenomenon | Possible reasons | solution |
|---|---|---|
| Can't pull out | Orbital deformation | After lubrication, try shaking it from side to side |
| Button not working | Spring failure | Use a thin stick to assist in pressing |
| Severe abnormal noise | Ball defect | Need to replace the entire set of slide rails |
3. Safety precautions
1. Keep the drawer level when disassembling to avoid deformation of the track caused by force on one side.
2. Heavy-duty drawers require the cooperation of two people to prevent injuries from falling.
3. Keep all small parts, it is recommended to use a magnet tray to collect screws
4. Take photos of the disassembly process for later installation reference.
4. Characteristics of drawers of different brands
| brand | Features | Dismantling points |
|---|---|---|
| ikea | Standardized design | Pay attention to the bottom buckle |
| Haier | Heavy duty slide | The fixing bracket needs to be removed first |
| OPPEIN | Hidden track | Release from the inside |
5. Suggestions for handling after disassembly
1. Clean the dust and foreign matter in the track groove
2. Check whether the balls are intact and apply special grease if necessary
3. It is recommended to replace the severely deformed track directly.
4. When reorganizing, install the track first and then fix the drawer.
With the above structured guidance, you should be able to complete the disassembly of your telescoping drawer safely and efficiently. If you need more help, you can refer to the disassembly and assembly video tutorials provided by the official websites of major brands.
check the details
check the details
en
